The PGC FLEX offers the ultimate in flexibility. In its standard configuration, the chamber operates as a single-tier highlight growth chamber with a counterbalanced light canopy and upward airflow. A simple conversion alters the chamber’s configuration to either a double or triple tier configuration with medium light intensity and horizontal airflow. In a footprint slightly larger than 21.5 ft² (2 m²), the FLEX provides either 19 ft² (1.8 m²), 38 ft² (3.6 m²), or 57 ft² (5.2 m²) of growth area with corresponding growth heights of 59.75" (1520 mm), 25" (635 mm), and 14" (355 mm), respectively. The unique flexibility of the PGC FLEX makes it ideal for use in facilities with multiple research programs. Please consult Conviron regarding specific requirements.

(See specifications for single-tier with upward airflow below.)

The ATC26 offers a small footprint and a low overall height which allows the unit to pass through doorways fully assembled. The interior of the cabinet features two shelves and light canopies with a plant height that is suitable for growing low and medium height plants. This makes the ATC26 an ideal cabinet for growing such species as Arabidopsis from seed to full maturity. Also, the ATC26 is shipped fully assembled thereby simplifying installation and set-up procedures. Please consult Conviron regarding specific requirements.

The ATC60 provides an exceptional growth-area-to-footprint ratio. It uses a top-mounted refrigeration system that accommodates servicing from the front of the chamber, and that simplifies on-site installation. The ATC60 offers three tiers with almost 60 ft² (5.5 m²) of growth area in a 25 ft² (2.32 m²) footprint. With a growth height of 20 inches (510 mm) above each shelf, the ATC60 is ideally suited for Arabidopsis and other short to medium height plants. Standard on the ATC60 is a flood tray at each tier to simplify plant irrigation. Please consult Conviron regarding specific requirements.

The E8 is a highly customizable plant growth chamber capable of achieving extreme conditions of temperature, lighting levels, and humidity. The product is well suited for research applications requiring a high level of control in a relatively small footprint. In addition to customizable environmental control parameters, options are also available for growth height, gas levels, and a variety of refrigeration configurations. The E8 offers a minimum growth height of 46” (1180mm) in an 8ft² (0.74m²) growth area. Please consult Conviron for your specific requirements.

The MTR26 provides 26ft² (2.4m²)of growth area and 24” (610mm) of growth height over two shelves and is suitable for a range of applications including the growth of short to medium height plants that require moderate light intensity. Standard is a closed-loop lighting system. The chamber is shipped fully assembled, fits through standard doorways, and has a low overall height for confined ceiling spaces. Please consult Conviron with your particular application and area of research and we will provide you with an overview of the available options.

The PGC20 offers an exceptional growth-area-to-footprint ratio. With the refrigeration and electrical systems entirely topmounted, the PGC20 provides 20 ft² (1.9 mm²) of growth area in a footprint of less than 25 ft²  (2.4 m²). Using a counter-balanced light canopy, the growth height extends to a maximum of 59” (1500 mm) making the PGC20 an ideal candidate for research involving tall plant species to full maturity. Please consult Conviron regarding specific requirements.

The PGR15 offers 16 ft² (1.5 m²) of growth area and 57 inches (1450 mm) of growth height making it suitable for a range of applications including the growth of many tall plant species to full maturity. Standard is a counter balanced light canopy system. Shipped fully assembled, the PGR15 fits through standard doorways. Please consult Conviron with your particular application and area of research and we will provide you with an overview of the available options.

The BDW series walk-in chamber is based on a modular platform available in increments of 40 ft² (3.7 m²). These units offer a precise chamber environment typical of research involving C4 high-light plants grown to maturity. Unique to this product is the top-down airflow pattern which ensures consistent plant canopy temperatures throughout the chamber. Spectral aluminum on the interior walls produces exceptional light uniformity, while the discreet lamp loft area uses a separate cooling system to mitigate heat produced by the lighting system.

The TCR walk-in room provides a multi-tier modular platform available in increments of 60ft² (5.6m²). This makes the TCR chamber suitable for research involving plant tissue culture and is often used within large micropropagation programs. The solid side wall plenums transfer air to individual air shelves ensuring upward airflow from each individual shelf, which is essential in mitigating condensation within media dishes.

The CG series of walk-in chambers provides an outstanding growth area-to-footprint ratio. Upward airflow is delivered using Conviron’s Unifloor® system allowing plants to be distributed throughout the entire floor area. These chambers are typically used for both short and tall plant applications requiring moderate to high level light intensities. Multiple lamp canopies enable researchers to vary the distance from the light sources to research specimens. Temperature uniformity is assured via an upward airflow pattern.

With its unique ability to adapt to four different research applications, the Adaptis A1000 offers an economical and flexible equipment platform. The base chamber itself can be fitted with one of four specially configured kits, and each kit is specifically designed for a particular application including: Plant Growth, Arabidopsis, Tissue Culture, and Incubation. By varying the configuration of the airflow, light, and shelving, each kit defines one of the four applications. The A1000 is also available with several options such as phenolic coated coils and network communication. The phenolic coated coils enable the A1000 to be used for entomology research while the communications option facilitates connection to a facility’s local area network.

The TC80 is specifically designed for the growth of tissue culture. With four shelves and a top-mounted refrigeration system, the TC80 provides an exceptional growth area-to-footprint ratio. The four shelves channel the airflow upward which acts to minimize the formation of condensation inside the lids of Petri dishes and other tissue culture vessels. Please consult Conviron regarding specific requirements.

With its unique ability to adapt to four different research applications, the Adaptis A1000 offers an economical and flexible equipment platform. The base chamber itself can be fitted with one of four specially configured kits, and each kit is specifically designed for a particular application including: Plant Growth, Arabidopsis, Tissue Culture, and Incubation. By varying the configuration of the airflow, light, and shelving, each kit defines one of the four applications. The A1000 is also available with several options such as phenolic coated coils and network communication. The phenolic coated coils enable the A1000 to be used for entomology research while the communications option facilitates connection to a facility’s local area network.

The ATC26 offers a small footprint and a low overall height which allows the unit to pass through doorways fully assembled. The interior of the cabinet features two shelves and light canopies with a plant height that is suitable for growing low and medium height plants. This makes the ATC26 an ideal cabinet for growing such species as Arabidopsis from seed to full maturity. Also, the ATC26 is shipped fully assembled thereby simplifying installation and set-up procedures. Please consult Conviron regarding specific requirements.

The ATC60 provides an exceptional growth-area-to-footprint ratio. It uses a top-mounted refrigeration system that accommodates servicing from the front of the chamber, and that simplifies on-site installation. The ATC60 offers three tiers with almost 60 ft² (5.5 m²) of growth area in a 25 ft² (2.32 m²) footprint. With a growth height of 20 inches (510 mm) above each shelf, the ATC60 is ideally suited for Arabidopsis and other short to medium height plants. Standard on the ATC60 is a flood tray at each tier to simplify plant irrigation. Please consult Conviron regarding specific requirements.

The MTR26 provides 26ft² (2.4m²)of growth area and 24” (610mm) of growth height over two shelves and is suitable for a range of applications including the growth of short to medium height plants that require moderate light intensity. Standard is a closed-loop lighting system. The chamber is shipped fully assembled, fits through standard doorways, and has a low overall height for confined ceiling spaces. Please consult Conviron with your particular application and area of research and we will provide you with an overview of the available options.

The TCR walk-in room provides a multi-tier modular platform available in increments of 60ft² (5.6m²). This makes the TCR chamber suitable for research involving plant tissue culture and is often used within large micropropagation programs. The solid side wall plenums transfer air to individual air shelves ensuring upward airflow from each individual shelf, which is essential in mitigating condensation within media dishes.

With its unique ability to adapt to four different research applications, the Adaptis A1000 offers an economical and flexible equipment platform. The base chamber itself can be fitted with one of four specially configured kits, and each kit is specifically designed for a particular application including: Plant Growth, Arabidopsis, Tissue Culture, and Incubation. By varying the configuration of the airflow, light, and shelving, each kit defines one of the four applications. The A1000 is also available with several options such as phenolic coated coils and network communication. The phenolic coated coils enable the A1000 to be used for entomology research while the communications option facilitates connection to a facility’s local area network.

With its unique ability to adapt to four different research applications, the Adaptis A1000 offers an economical and flexible equipment platform. The base chamber itself can be fitted with one of four specially configured kits, and each kit is specifically designed for a particular application including: Plant Growth, Arabidopsis, Tissue Culture, and Incubation. By varying the configuration of the airflow, light, and shelving, each kit defines one of the four applications. The A1000 is also available with several options such as phenolic coated coils and network communication. The phenolic coated coils enable the A1000 to be used for entomology research while the communications option facilitates connection to a facility’s local area network.

Conviron 's SR Series seed storage rooms  are based on a modular platform. These seed storage rooms are custom sized  for each application and are suitable for both long term and medium term collections. Long term seed storage conditions are typically set to minus 18 degrees C while medium term collections are stored at 4 degrees C and 30 to 50%  RH. Dehumidification is provided  using a chemical dehumidifier.  Several different cooling methods are available while complete mechanical system redundancy is also available where required.

Conviron’s DR Series dew rooms are uniquely designed for testing in a high (100% RH) humidity, or ‘saturated’ or ‘mist’, environment. A typical application in plant pathology, for example, is the testing of plants infected with disease where the high humidity promotes disease propagation. Dew rooms provide horizontal airflow with air discharge via a perforated side wall plenum. Lighting on the standard configuration is for visibility purposes only. To achieve the high humidity levels, the system employs (pre-coil) primary spray nozzles, which spray continuously, as well as a (post-coil) secondary cycling spray nozzles programmed by the user. Stainless steel is used on the interior for corrosion prevention.