Options

In addition to our extensive portfolio of standard products, Conviron also offers a host of configurable options and engineered modifications. A list of our most common preconfigured options are featured below. For our complete offering of options and customization, contact Conviron.

View the Options Brochure

This four-page brochure is a convenient reference guide to assist in quickly finding common product specifications and options for the complete line of Conviron plant growth chambers and rooms.

Brochure Request Info
Programming Construction Lighting Temperature Refrigeration Humidity Carbon Dioxide Show All

Programming Options

Argus Titan Control System

Argus Titan Control System
Designed to provide comprehensive monitoring and equipment automation throughout your facility.

Auto Watering System

Auto Watering System
Hose bib connection controlled by programmable solenoid.

Auxiliary Circuits

Auxiliary Circuits
Programmable on/off output, provides an auxiliary switch, terminated in the control panel, for timed control of automatic watering, nutrient dosing, etc. Up to four switches available.

Controller UPS

Controller UPS
Surge protection and uninterrupted power supply, on controller only, for continuous operation of the controller during power interruptions.

Construction Options

Ebb & Flow Irrigation System

Ebb & Flow Irrigation System
Automatic control of irrigation system controlled through the control system.

Exhaust Collar

Exhaust Collar
Allows connection to central exhaust system, measuring 4” (100mm).

Fresh Air

Fresh Air
Filtered inlet G3 type, washable, 100 cfm (48 l/s) providing a constant 4x air changes per hour.

Growth Height

Growth Height
Extended growth and exterior heights.

Electrical Receptacles, Type & Location

Electrical Receptacles, Type & Location
Wall mounted convenience electrical receptacle within growth area (2 amp allowance).

Exhaust HEPA Filter

Exhaust HEPA Filter
Installed to the exhaust outlets made easily accessible for removal. Call for availability.

Lighting Options

High Intensity Discharge Lighting

High Intensity Discharge
Using metal halide and high pressure sodium lamps.

High Light Intensity

High Light Intensity
Using fluorescent and halogen incandescent lamps.

LED Lighting

LED
Various LED spectrums available allowing for a wide range of intensities. Dimming optional.

Lamp canopy with dimming ballasts

Lamps Incorporate Dimming Ballasts
Programmable or manual adjustment of light intensity within the programmed range (as low as 5% with fluorescent, 25% with Metal Halide, 30% with High Pressure Sodium and 40% with Ceramic Metal Halide), to maximum intensity. Incandescent lamps are controlled in light levels.

Manual Dimmable Lighting System

Manual Dimmable Lighting System
Manual adjustment of light intensity within the programmed range as low as 5% with fluorescent lamps, to maximum intensity.

Multi-Tier Operation

Multi-Tier Operation
Multi-tier shelving assemblies provide a maximum light intensity of 500 micromoles/m²/s each.

Water-Cooled Lamp Loft

Water-Cooled Lamp Loft
Lamp heat removed by a dedicated water cooling coil.

Temperature Options

Circulation Fan Speed Control

Circulation Fan Speed Control
Programmable or manual fan speed control on conditioning unit, from 50% to maximum.

Low Temperature Operation

Low Temperature Operation
Enables the chamber to be operated with lights ON to +2°C (No fresh air below 4°C.) A defrost cycle will occur resulting in a temperature increase (spike) for temperatures set below +8°C lights ON/OFF.

Ultra-Low Temperature Operation

Ultra-Low Temperature Operation
Enables the chamber to be operated with lights ON to -10°C (No fresh air below 4°C.) A defrost cycle will occur resulting in a temperature increase (spike) for temperatures set below +8°C lights ON/OFF.

Sequential Defrost

Sequential Defrost
Multiple cooling coils with a sequenced defrost cycle to eliminate the temperature spike experienced with the standard defrost method.

Refrigeration Options

Air-Cooled Self-Contained Condensing Unit

Air-Cooled Self-Contained Condensing Unit
Cabinet is supplied with an air-cooled, self-contained condensing unit with hot gas bypass system for continuous compressor operation and close temperature control. Condensing unit is located in the machine compartment.

Remote Outdoor Air-Cooled Condenser

Remote Outdoor Air-Cooled Condenser
Comes complete with all-weather housing, low ambient operation controls and low noise level operation.

Outdoor Air-Cooled Condensing Unit

Outdoor Air-Cooled Condensing Unit
Containing condenser, compressor, receiver, suction accumulator, control and pressure regulating valves and electrical disconnect.

Water-Cooled Condensing Unit

Water-Cooled Condensing Unit
Cabinet is supplied with a water-cooled condensing unit with hot gas bypass system for continuous compressor operation, extended compressor life and close temperature control.

Glycol Designed Heating/Cooling

Chilled Water/Glycol Designed Heating or Cooling
Cooling system designed to work with a central chiller refrigeration system.

Phenolic Coated Refrigeration Coil

Phenolic Coated Refrigeration Coil
The evaporator coil is protected by a phenolic coating that is resistive to corrosion.

Humidity Options

Assisted Spray Nozzle Humidification

Assisted Spray Nozzle Humidification
Additive humidity provided by combining liquid and compressed air to create a mist of finely atomized spray. System requires reverse osmosis water.

Spray Nozzle Humidification

Spray Nozzle Humidification
Additive humidity provided by pressurized (60 PSI) water only to create mist spray.

Ultrasonic Humidification

Ultrasonic Humidification
Uses an ultrasonic frequency to turn water into an airborne mist that is forced out into the air to raise humidity.

Bypass Dehumidification

Bypass Dehumidification
A precisely controlled volume of chamber air bypasses the heat exchanger by means of a proportionally controlled air damper.

Dehumidification by Chemical Dryer

Dehumidification by Chemical Dryer
Chamber air is passed over a desiccant to remove moisture.

Separate Coil Dehumidification

Separate Coil Dehumidification
Draws air from the growth area through a cooling coil to remove the moisture by condensation.

Carbon Dioxide Options

CO₂ Additive Control

CO₂ Additive Control
package includes gas analyzer, CO₂ regulator (NA only), control valve and injection system. CO₂ tank not included.

CO₂ Back Pack

CO₂ Additive Back Pack
Portable system is mounted on the side of the chamber as a standalone device complete with its own CO₂ process controller.

CO₂ Scrubber

CO₂ Scrubber
Allows for controlling CO₂ concentration levels below resultant conditions. Stand-alone device (floor or roof mounted).